|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
 |
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
 |
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
 |
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
 |
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
 |
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
 |
IEEE 1394 Bus to PCI
Interface card
Model KW-582
$79.00
Easy Plug and Play installation. |
FEATURES:
- IEEE 1394 interface
- Support provisions of IEEE 1394 for high performance serial bus
- Detect lost cycle start messages.
- Performs the function of 1394 Cycle Master.
- Generates 32 bit CRC for transmission of 1394 packets.
- Perform 32 bit CRC checking on reception of 1394 packets.
- Support IEEE 1394 transfer rates of 100/200/400 Mbit.
- Provides three sizes of programmable FIFO
- Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel.
- Supports DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV.
- Provides PCI Bus master function for supporting DMA operations.
- Provides PCI slave function for read/write access of internal registers.
- Implements a 32-bit PCI address-data path.
- Provides PCI address-data parity checking.
- Support the Plug-N-Play specification.
- Easy Plug and Play installation.
- Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external loginc.
- Operates from a 3.3V power supply while maintaining 5V tolerant inputs
- PCI Specification revision 2.2 compliant.
- Support advanced PCI commands.
- Provides Software control of interrupt events.
|
