|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
FEATURES:
- Brand New In Retail Box
- Uses Initio Ultra SCSI controller (INIC-1060p chip).
- PCI 2.1 compliant interface.
- Supports a range of SCSI devices including CD-Recorders, Jazz, Hard Drives, Zip Drives, Scanners and more..
- Internal Ultra 2 SCSI 68-Pin Connector
- External Ultra 2 SCSI 68-Pin Connector
- Bus Mastering capability.
- SCSI transfer rates from 5 Mb/s synchronous narrow SCSI to 80 Mb/s wide LVD SCSI
- Support Plug & Play, 64-bytes DMA FIFO.
- Support up to 15 peripheral LVD devices on a 12 meter cable.
- On board BIOS boot ROM to provide the necessary configuration mechanisms for installation, configuration, and booting without user intervention.
- Burst transfer rates of 132Mbytes/sec.
- Supports both auto and programmable SCSI termination.
- 256 Byte data FIFO.
- 32 bit RISC handles all interrupts and command queue processing.
- Supports Plug and Play to allow the user to change configurations without the use of jumpers.
- Support for FLASH ROM
- Hot Plug PCI Power Management support.
- Backward compatible with Legacy SCSI devices.
- Fully Compatible with DOS, Windows, Novell, OS/2, UNIX and more..
- For Pentium/ Pentium Pro/ P55C/ Pentium II PCI bus system
- Contents:
930W Ultra 2 SCSI Bus Mastering Controller.
One 3-position, 68-pin UltraSCSI internal ribbon cable
Installation Guide
Drivers for -- DOS, Windows 3.1, Windows 95/98, Windows NT ,NetWare, OS/2 Warp, SCO UNIX, UnixWare.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
FEATURES:
- Brand New In Retail Box
- Uses Initio Ultra SCSI controller (INIC-1060p chip).
- PCI 2.1 compliant interface.
- Supports a range of SCSI devices including CD-Recorders, Jazz, Hard Drives, Zip Drives, Scanners and more..
- Internal Ultra 2 SCSI 68-Pin Connector
- External Ultra 2 SCSI 68-Pin Connector
- Bus Mastering capability.
- SCSI transfer rates from 5 Mb/s synchronous narrow SCSI to 80 Mb/s wide LVD SCSI
- Support Plug & Play, 64-bytes DMA FIFO.
- Support up to 15 peripheral LVD devices on a 12 meter cable.
- On board BIOS boot ROM to provide the necessary configuration mechanisms for installation, configuration, and booting without user intervention.
- Burst transfer rates of 132Mbytes/sec.
- Supports both auto and programmable SCSI termination.
- 256 Byte data FIFO.
- 32 bit RISC handles all interrupts and command queue processing.
- Supports Plug and Play to allow the user to change configurations without the use of jumpers.
- Support for FLASH ROM
- Hot Plug PCI Power Management support.
- Backward compatible with Legacy SCSI devices.
- Fully Compatible with DOS, Windows, Novell, OS/2, UNIX and more..
- For Pentium/ Pentium Pro/ P55C/ Pentium II PCI bus system
- Contents:
930W Ultra 2 SCSI Bus Mastering Controller.
One 3-position, 68-pin UltraSCSI internal ribbon cable
Installation Guide
Drivers for -- DOS, Windows 3.1, Windows 95/98, Windows NT ,NetWare, OS/2 Warp, SCO UNIX, UnixWare.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
FEATURES:
- Brand New In Retail Box
- Uses Initio Ultra SCSI controller (INIC-1060p chip).
- PCI 2.1 compliant interface.
- Supports a range of SCSI devices including CD-Recorders, Jazz, Hard Drives, Zip Drives, Scanners and more..
- Internal Ultra 2 SCSI 68-Pin Connector
- External Ultra 2 SCSI 68-Pin Connector
- Bus Mastering capability.
- SCSI transfer rates from 5 Mb/s synchronous narrow SCSI to 80 Mb/s wide LVD SCSI
- Support Plug & Play, 64-bytes DMA FIFO.
- Support up to 15 peripheral LVD devices on a 12 meter cable.
- On board BIOS boot ROM to provide the necessary configuration mechanisms for installation, configuration, and booting without user intervention.
- Burst transfer rates of 132Mbytes/sec.
- Supports both auto and programmable SCSI termination.
- 256 Byte data FIFO.
- 32 bit RISC handles all interrupts and command queue processing.
- Supports Plug and Play to allow the user to change configurations without the use of jumpers.
- Support for FLASH ROM
- Hot Plug PCI Power Management support.
- Backward compatible with Legacy SCSI devices.
- Fully Compatible with DOS, Windows, Novell, OS/2, UNIX and more..
- For Pentium/ Pentium Pro/ P55C/ Pentium II PCI bus system
- Contents:
930W Ultra 2 SCSI Bus Mastering Controller.
One 3-position, 68-pin UltraSCSI internal ribbon cable
Installation Guide
Drivers for -- DOS, Windows 3.1, Windows 95/98, Windows NT ,NetWare, OS/2 Warp, SCO UNIX, UnixWare.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
FEATURES:
- Brand New In Retail Box
- Uses Initio Ultra SCSI controller (INIC-1060p chip).
- PCI 2.1 compliant interface.
- Supports a range of SCSI devices including CD-Recorders, Jazz, Hard Drives, Zip Drives, Scanners and more..
- Internal Ultra 2 SCSI 68-Pin Connector
- External Ultra 2 SCSI 68-Pin Connector
- Bus Mastering capability.
- SCSI transfer rates from 5 Mb/s synchronous narrow SCSI to 80 Mb/s wide LVD SCSI
- Support Plug & Play, 64-bytes DMA FIFO.
- Support up to 15 peripheral LVD devices on a 12 meter cable.
- On board BIOS boot ROM to provide the necessary configuration mechanisms for installation, configuration, and booting without user intervention.
- Burst transfer rates of 132Mbytes/sec.
- Supports both auto and programmable SCSI termination.
- 256 Byte data FIFO.
- 32 bit RISC handles all interrupts and command queue processing.
- Supports Plug and Play to allow the user to change configurations without the use of jumpers.
- Support for FLASH ROM
- Hot Plug PCI Power Management support.
- Backward compatible with Legacy SCSI devices.
- Fully Compatible with DOS, Windows, Novell, OS/2, UNIX and more..
- For Pentium/ Pentium Pro/ P55C/ Pentium II PCI bus system
- Contents:
930W Ultra 2 SCSI Bus Mastering Controller.
One 3-position, 68-pin UltraSCSI internal ribbon cable
Installation Guide
Drivers for -- DOS, Windows 3.1, Windows 95/98, Windows NT ,NetWare, OS/2 Warp, SCO UNIX, UnixWare.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
FEATURES:
- Brand New In Retail Box
- Uses Initio Ultra SCSI controller (INIC-1060p chip).
- PCI 2.1 compliant interface.
- Supports a range of SCSI devices including CD-Recorders, Jazz, Hard Drives, Zip Drives, Scanners and more..
- Internal Ultra 2 SCSI 68-Pin Connector
- External Ultra 2 SCSI 68-Pin Connector
- Bus Mastering capability.
- SCSI transfer rates from 5 Mb/s synchronous narrow SCSI to 80 Mb/s wide LVD SCSI
- Support Plug & Play, 64-bytes DMA FIFO.
- Support up to 15 peripheral LVD devices on a 12 meter cable.
- On board BIOS boot ROM to provide the necessary configuration mechanisms for installation, configuration, and booting without user intervention.
- Burst transfer rates of 132Mbytes/sec.
- Supports both auto and programmable SCSI termination.
- 256 Byte data FIFO.
- 32 bit RISC handles all interrupts and command queue processing.
- Supports Plug and Play to allow the user to change configurations without the use of jumpers.
- Support for FLASH ROM
- Hot Plug PCI Power Management support.
- Backward compatible with Legacy SCSI devices.
- Fully Compatible with DOS, Windows, Novell, OS/2, UNIX and more..
- For Pentium/ Pentium Pro/ P55C/ Pentium II PCI bus system
- Contents:
930W Ultra 2 SCSI Bus Mastering Controller.
One 3-position, 68-pin UltraSCSI internal ribbon cable
Installation Guide
Drivers for -- DOS, Windows 3.1, Windows 95/98, Windows NT ,NetWare, OS/2 Warp, SCO UNIX, UnixWare.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
FEATURES:
- Brand New In Retail Box
- Uses Initio Ultra SCSI controller (INIC-1060p chip).
- PCI 2.1 compliant interface.
- Supports a range of SCSI devices including CD-Recorders, Jazz, Hard Drives, Zip Drives, Scanners and more..
- Internal Ultra 2 SCSI 68-Pin Connector
- External Ultra 2 SCSI 68-Pin Connector
- Bus Mastering capability.
- SCSI transfer rates from 5 Mb/s synchronous narrow SCSI to 80 Mb/s wide LVD SCSI
- Support Plug & Play, 64-bytes DMA FIFO.
- Support up to 15 peripheral LVD devices on a 12 meter cable.
- On board BIOS boot ROM to provide the necessary configuration mechanisms for installation, configuration, and booting without user intervention.
- Burst transfer rates of 132Mbytes/sec.
- Supports both auto and programmable SCSI termination.
- 256 Byte data FIFO.
- 32 bit RISC handles all interrupts and command queue processing.
- Supports Plug and Play to allow the user to change configurations without the use of jumpers.
- Support for FLASH ROM
- Hot Plug PCI Power Management support.
- Backward compatible with Legacy SCSI devices.
- Fully Compatible with DOS, Windows, Novell, OS/2, UNIX and more..
- For Pentium/ Pentium Pro/ P55C/ Pentium II PCI bus system
- Contents:
930W Ultra 2 SCSI Bus Mastering Controller.
One 3-position, 68-pin UltraSCSI internal ribbon cable
Installation Guide
Drivers for -- DOS, Windows 3.1, Windows 95/98, Windows NT ,NetWare, OS/2 Warp, SCO UNIX, UnixWare.
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
FEATURES:
- Brand New In Retail Box
- Uses Initio Ultra SCSI controller (INIC-1060p chip).
- PCI 2.1 compliant interface.
- Supports a range of SCSI devices including CD-Recorders, Jazz, Hard Drives, Zip Drives, Scanners and more..
- Internal Ultra 2 SCSI 68-Pin Connector
- External Ultra 2 SCSI 68-Pin Connector
- Bus Mastering capability.
- SCSI transfer rates from 5 Mb/s synchronous narrow SCSI to 80 Mb/s wide LVD SCSI
- Support Plug & Play, 64-bytes DMA FIFO.
- Support up to 15 peripheral LVD devices on a 12 meter cable.
- On board BIOS boot ROM to provide the necessary configuration mechanisms for installation, configuration, and booting without user intervention.
- Burst transfer rates of 132Mbytes/sec.
- Supports both auto and programmable SCSI termination.
- 256 Byte data FIFO.
- 32 bit RISC handles all interrupts and command queue processing.
- Supports Plug and Play to allow the user to change configurations without the use of jumpers.
- Support for FLASH ROM
- Hot Plug PCI Power Management support.
- Backward compatible with Legacy SCSI devices.
- Fully Compatible with DOS, Windows, Novell, OS/2, UNIX and more..
- For Pentium/ Pentium Pro/ P55C/ Pentium II PCI bus system
- Contents:
930W Ultra 2 SCSI Bus Mastering Controller.
One 3-position, 68-pin UltraSCSI internal ribbon cable
Installation Guide
Drivers for -- DOS, Windows 3.1, Windows 95/98, Windows NT ,NetWare, OS/2 Warp, SCO UNIX, UnixWare.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
FEATURES:
- Brand New In Retail Box
- Uses Initio Ultra SCSI controller (INIC-1060p chip).
- PCI 2.1 compliant interface.
- Supports a range of SCSI devices including CD-Recorders, Jazz, Hard Drives, Zip Drives, Scanners and more..
- Internal Ultra 2 SCSI 68-Pin Connector
- External Ultra 2 SCSI 68-Pin Connector
- Bus Mastering capability.
- SCSI transfer rates from 5 Mb/s synchronous narrow SCSI to 80 Mb/s wide LVD SCSI
- Support Plug & Play, 64-bytes DMA FIFO.
- Support up to 15 peripheral LVD devices on a 12 meter cable.
- On board BIOS boot ROM to provide the necessary configuration mechanisms for installation, configuration, and booting without user intervention.
- Burst transfer rates of 132Mbytes/sec.
- Supports both auto and programmable SCSI termination.
- 256 Byte data FIFO.
- 32 bit RISC handles all interrupts and command queue processing.
- Supports Plug and Play to allow the user to change configurations without the use of jumpers.
- Support for FLASH ROM
- Hot Plug PCI Power Management support.
- Backward compatible with Legacy SCSI devices.
- Fully Compatible with DOS, Windows, Novell, OS/2, UNIX and more..
- For Pentium/ Pentium Pro/ P55C/ Pentium II PCI bus system
- Contents:
930W Ultra 2 SCSI Bus Mastering Controller.
One 3-position, 68-pin UltraSCSI internal ribbon cable
Installation Guide
Drivers for -- DOS, Windows 3.1, Windows 95/98, Windows NT ,NetWare, OS/2 Warp, SCO UNIX, UnixWare.
|
